Looking to buy an air compressor for home use but want to know how to use it first? Check out our guide to learn how to do use it like a pro.
An air compressor is a machine that converts power into potential energy, which is then stored in pressurized air. It uses diesel or gasoline engine or can use an electric motor for the process.
It forces air to go in a storage tank causing an increase in pressure. This electric machine is necessary because it makes work easy in the process of storing air. This recent innovation uses the motion of a piston, then through an intake
Step By Step Guide On To Use An Air Compressor
- Check the oil in your pump. Confirm whether your air compressor uses oil or is oil free then fill it to 2/3 of the stick.
- Attach the hose and regulator valve. Find the round copper metal plug with a hole in the middle which is the regulator valve then push the hose end into the valve.
- Plug in the power tool. Push the power tool’s plug in the hose and twist in opposite directions until it firmly locks.
- When plugging the compressor in the 3-
plongoutlet, if the cord is short instead of using an extension cord, plug another air hose into the first one and finish connecting it to the plong.
Make sure you observe the safety measures by putting on safety goggles and closed shoes or gumboots.
- Locate the copper plug and tug it towards yourself, make sure you can hear the hissing air before pushing the valve in place and then start the compressor.
- Flip the switch to turn on the tank and let it buzz to life. When the needle stops moving it means the air has reached maximum pressure.
- Countercheck on the tool to confirm how much pressure is needed.
Match the regulator knob to the tool’s PSI.
- When air is in the tank the tool is ready for use, this pressure refills automatically as you use the tool.
- When you’re done, twist the tool’s valve counterclockwise to blow out the collected moisture then twist it clockwise until there’s no more air, listen for the air flow.
- Shut off air supply by twisting the regulator and turn
- Remove the hose from the valve after unplugging it from the wall. If your compressor uses oil, make sure to refill it yearly.
Tips To Maintain An Air Compressor
In air compressors, electrical energy is converted to kinetic energy through air compression. Proper maintenance ensures long life and reduces operational costs. The compressor may malfunction if maintained poorly. It may also breakdown if neglected. This can be costly.
Tip 1- Follow the manual
Read, understand and follow the compressors manual. Keep it in a place where it can be retrieved easily.
- Manuals come in handy in case you encounter a problem.
- They point out the different air compressor parts that need cleaning.
- They also note those parts that should not be touched or managed.
- Manuals also provide instructions on safety.
Tip 2- Check and change pump oil
If the air compressor uses oil, the oil level needs to be checked regularly. The user manual states the oil level needed for the compressor. First check the pump oil before using the compressor and change it if needed. To check, first disconnect the power source and place the compressor in a flat position.
- Open the fill cap and check the amount inside.
- To change the oil, place a container under the oil drain cap and open it. The used oil will come out and be collected.
- Replace the drain cap. Then pour oil recommended by the manufacturer into the tank.
- Then replace the fill cap properly in its place.
Tip 3- Check and clean air filter
Dust and dirt from the air is collected by the air filterwhich should be cleaned after every use. Failing to do this can result in filter leaking and passing dirt to the compressors internal components.
- To locate the filter, check the user manual.
- Take out air filter and clean it.
- Ensure it is free of all dirt, dust and contaminated elements.
- Some filters are washable but ensure it also fully dries.
- If the filter is torn or damaged, replace it.
Tip 4- Titghten the screws
Air compressors vibrate during use. Screws can therefore get loose and affect the compressors functioning. Check and tighten screws every day to maintain the air compressor.
Tip 5- Check compressor belt
Used in manually linking two pulleys.Check the pulleys and the belt weekly or daily. If the belt is fine, leave it. If there is a tear, replace it. To change the belt
- Pull the previous belt over the larger pulley to take it out.
- After taking a little portion out rotate the pulleys and the belt will come out easily.
- To set a new belt, place the belt on the smaller pulley and try setting it on the larger one.
- When a small portion is placed on the larger pulley, rotate it to set the whole belt.
If the belt is new, it is okay to check weekly. Older ones need to be checked daily before use. Air compressors are not toys; care and caution should be maintained.
How To Maintain Your Air Compressor?
Benefits Of Having An Compressor
- The air is durable and portable.
- You don’t need gas pumps and gas stations.
- The air is multipurpose.
You can also check out paint sprayers for your home
In conclusion, the air generated from an air compressor can be used all round and does not have an expiry date. This machine is easy to use and provides good service.
Amanda is the founder of Consumers Base and many other authority websites. She loves to explore new things. She has excellent literal ability and an eye for the finer details in life which makes her content amazing.